Excel were instructed to design and install a Delta Membrane System to an existing lower ground floor basement in a residential dwelling, located in the prestigious Chelsea area in London.
Delta Ms500 was installed to the perimeter and party walls with additional fixings to allow for an independent stud partition. Delta PT was installed to the retained internal walls to allow for a wet trade finish (i.e render) The Delta MS 20 was installed over the top of the new concrete slab. Drainage for the cavity drain system was installed using the Delta perimeter drainage channel, with two sump pumps situated to the front and rear light well of the project.
Due to the services provided by Excel we were instructed to install the insulation and 156m2 sq of 60mm polymer reinforced sand cement screed.
As a Delta approved contractor we work closely with Delta to ensure up to date product knowledge and training/techniques. Delta recognise that the correct diagnosis of the problem is essential so that DELTA® Systems can be designed and tailored to the needs of the building, to give the best possible performance. It is therefore recommended that only competent specialist contractors, who understand dampness, and the associated problems, be employed to survey the site, install the system and thereby ensure the best possible performance of the system.
For further information on the operational range of services provided by Excel Waterproofing Contractors please visit us www.excelwaterproofing.co.uk or contact or specialist team on 01277 355708.